Skip to main content

Rogue Engineering Rear Shock Mounts for 1989-2006 BMW 3-Series/M3 [E30/E36/E46] (RSM)

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!

Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

$104.99
(No reviews yet) Write a Review
SKU:
Rogue-Engineering-RSM-E46-ER

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!

Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.
Shipping:
$12.00 (Fixed Shipping Cost)
Rogue Engineering Rear Shock Mounts for 1989-2006 BMW 3-Series/M3 [E30/E36/E46] (RSM)

WARNING: product may contain chemicals known to the State of California to cause cancer, birth defects, and/or reproductive harm.
For more information, go to www.P65Warnings.ca.gov.

DISCLAIMER: Products that affect or remove vehicle emissions equipment (Intakes, Manifolds, Tuners, etc) that do not have a CARB EO number may not be available for sale in the state of California. Please contact us if you are unsure if a product is available for sale in California. ModBargains complies with all EPA and CARB regulations.

New Page 1
About Rogue Engineering Rear Shock Mounts
 The factory BMW rear shock mounts are generally a little soft, to provide the most possible acoustically dampening in the vehicle. However, design precludes them from being stout enough to withstand the rigors of aftermarket suspension, or even badly damaged roads. A decent sized pothole can send a perfectly good factory rear shock mount to pop out, making it entirely useless, therefore requiring a replacement.

BMW's poor design often leads to the failing of the inner metal sleeve separating from the rubber bushing, causing squeaking, rattling, clunking and deflection of the rear shock mount.

Rogue Engineering decided to produce a rear shock machined from 6061-T6 aluminum. Rogue Engineering Rear Shock Mounts are able attain a more stable, and stiffer platform which to mount the top of the rear shock. However, rather than use race-only spherical bearings or even overly stiff urethane bushings, we specify Shore A 65 hardness rubber bushings (approximately 30% stiffer than the factory bushings) to allow for some level of street comfort. The orientation of the bushings makes it impossible for the bushings to ""pop out"" in the manner which the factory style mounts fail.

If you have any questions about these Rogue Engineering Rear Shock Mounts Please Give us a call at 714-582-3330

***The Rogue Engineering Rear Shock Mounts are designed to be used with standard 10mm rear shocks, but can also be used with 12mm adjustable race shocks with the use of optional washers.

Rogue Engineering Rear Shock Mount Application
  • All E30, including M3
  • All E36, including M3 and 318ti
  • All E46, including M3

Rogue Engineering Rear Shock Mount Set includes:

  • Two (2) Rogue Engineering 6061-T6 CNC, Anodized Rear Shock Mounts
  • Four (4) Shore A 65 Rubber Bushings
  • Two (2) 303 Stainless Steel Bushing Spacers (to be used with standard 10mm rear shocks)
  • Four (4) 303 Stainless Steel Washers (2 required per mount)
  • Four (4) Yellow Zinc plated serrated lock nuts
  • Two (2) Shock Tower Reinforcement Assemblies (with 10.9 hardware welded)
  • Two (2) factory gaskets (#33-52-1-128-734)

Rogue Engineering Rear Shock Mounts

If you have any questions about these Rogue Engineering Rear Shock Mounts Please Give us a call at 714-582-3330

 

Rogue Engineering Rear Shock Mount Installation Animations

If you have any questions about these Rogue Engineering Rear Shock Mounts Please Give us a call at 714-582-3330

Rogue Engineering Rear Shock Mounts Installation Video
Mod Category:
Suspension
Mod Subcategory:
Shock Absorbers / Struts