Edelbrock Performer-Plus Camshaft #2132 is designed for 290-401 AMC V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2132 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 275 Ft Lbs of Torque when paired with Performer AMC intake manifold #2131 and stock cylinder heads. Camshaft specifications: - Intake duration: 204 Degrees - Exhaust duration: 214 Degrees - Intake lift: .448" - Exhaust lift: .472" - Lobe separation: 110 Degree - Intake Center Line: 105 Degree - Vacuum: 15"
Edelbrock Performer-Plus #2132 is designed for 290-401 AMC V8 engines and produce optimum torque from the low-end to the mid-range.
AMC:Small-Block:290 (4.8L)/304 (5.0L)/360 (5.9L)/390 (6.4L)/401 (6.6L)
- Take the Guesswork Out of Camshaft Selection!
The Edelbrock Performer-Plus Camshaft #2132 is engineered specifically for AMC V8 engines ranging from 290 to 401 cubic inches, delivering optimized torque from low-end to mid-range RPMs. Designed for daily drivers, trucks, vans, RVs, and 4x4s, this camshaft enhances throttle response and overall power, making it ideal for a wide range of applications. When paired with Performer manifolds, the #2132 camshaft provides significant power gains, as demonstrated by torque graphs showing improved performance with Performer intake components. All cams include flat tappet lifters, assembly lube, and detailed instructions to facilitate installation and ensure proper operation.
Features:
- Optimized for AMC V8 engines 290-401 cubic inches, providing strong low-to-midrange torque
- Smooth idling profile suitable for daily driving, trucks, RVs, and 4x4 vehicles
- Includes flat tappet lifters, assembly lube, and installation instructions for ease of assembly
- Designed to work with Performer manifolds for maximum power gains
- Durations: 204° intake / 214° exhaust for balanced performance
- Intake lift: .448 inch / Exhaust lift: .472 inch for increased airflow
- Lobe separation: 110° with an intake centerline of 105°, optimized for torque
- air_freight_prohibited:
- false
- not_carb_approved:
- true
- carb_acknowledgement_required:
- true
- ltl_freight_required:
- false
- prop_65:
- Y
- part_type:
- automotive
- epa:
- N/A
- regular_stock:
- false
- units_per_sku:
- 1
- Mod Category:
- Performance
- Mod Subcategory:
- Valvetrain
