Skip to main content

COBB MAZDASPEED3 Gen2 SS 3" Cat-Back Exhaust - 572101

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

$891.52
(No reviews yet) Write a Review
SKU:
COBEC00007
MFG P/N:
572101

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

Shipping:
$31.50 (Fixed Shipping Cost)

WARNING: product may contain chemicals known to the State of California to cause cancer, birth defects, and/or reproductive harm.
For more information, go to www.P65Warnings.ca.gov.

DISCLAIMER: Products that affect or remove vehicle emissions equipment (Intakes, Manifolds, Tuners, etc) that do not have a CARB EO number may not be available for sale in the state of California. Please contact us if you are unsure if a product is available for sale in California. ModBargains complies with all EPA and CARB regulations.

Benefits:
  • Pull ahead of the competition in your Mazdaspeed3 with a Cobb Exhaust!
  • Turn heads in your Mazdaspeed3 as you pull up or fly by.
  • Turn down the radio and enjoy that sweet exhaust note.
Features:
  • Within SAE J1169 Sound Restrictions
  • Dual 4" Double Walled Slash Cut Tips
  • 3" to Dual 2.5" Mandrel Bent Piping
  • Works with COBB, Stock and Direct Replacement Downpipes
  • 304 Stainless Steel for Corrosion Resistance
Applications:
  • 2010-2013 Mazda Mazdaspeed3 USDM
  • 2010-2012 Mazda Mazdaspeed Axela WM
  • 2010-2012 Mazda Mazda3 MPS WM
Application Notes:
  • Emissions: This part is not an Emissions-related part and therefore can be used on Emission Controlled Vehicles.
Description:

The layout of this COBB 3" SS Cat-back was chosen to minimize the total bend degrees used to route the exhaust piping for reduced back pressure. The entire system fits within the factory exhaust path to allow the exhaust to be tucked up as close to the undercarriage as possible to achieve maximum ground clearance. Exhaust piping is 3" diameter from the downpipe to the split, where dual 2.5" pipes whisk the exhaust out of the system. The resulting path of least resistance minimizes back-pressure for maximum power gains. Harsh engine exhaust noise is subdued via one primary resonator and one secondary resonator. These chambered resonators provide sound reduction without adding restriction to the exhaust flow. The resulting mellow rumble sounds and feels powerful, without being overbearing. This exhaust was designed to meet the 95dB sound restriction even when used as part of a full turbo-back exhaust system. Significant effort went into making this exhaust look as good as it sounds and performs. Both resonators are custom built and finished with beautiful welds. The 2.5" and 3" stainless steel piping has a satin finish for a stunning appearance. The exhaust is finished with two 4" slash-cut, double-wall rolled tips with laser etched COBB logos. The entire kit is constructed of T304 stainless steel to ensure that it stays looking this great for years to come. This cat-back exhaust will work with the stock or any direct factory replacement downpipe. The two bolt flanges allow slight adjustability for absolutely perfect fitment. Includes all gaskets and hardware, and uses the stock doughnut gasket to mate to the downpipe.

The COBB Tuning 3" SS Catback Exhaust was engineered specifically to match the performance needs of the 2010-2013 MAZDASPEED3. The design of this Gen2 MAZDASPEED3 cat-back exhaust focused on three specific areas; reduced back-pressure for increased power potential, compliance with sound regulations when used in a full turbo-back exhaust system, and eye-popping styling. The final product is an over-achiever!


Mod Category:
Exhaust
Mod Subcategory:
Cat-Back