Edelbrock Performer RPM Camshaft Kit for Ford FE 390-428 V-8 Engines Part #7106

Edelbrock part #7106 Performer RPM Camshaft is designed for Ford FE 390-428 V-8 applications. This Edelbrock cam kit produced 418 HP & 434 ft-lbs. of torque when used with #7105 intake and #60069 cylinder heads on a 390 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 236 degrees - Duration @ .050 Exhaust: 236 degrees - Lift @ Valve Intake: .572" - Lift @ Valve Exhaust: .572" - Lobe Separation: 108 Degrees - Intake Centerline: 103 Degrees - Idle Vacuum @ 1000 RPM's: 11" Edelbrock part #7106 Performer RPM Camshaft is designed for Ford FE 390-428 V-8 applications. This Edelbrock cam kit produced 418 HP & 434 ft-lbs. of torque when used with #7105 intake and #60069 cylinder heads on a 390 engine. Ford:FE:332 (5.4L)/352 (5.8L)/360 (5.9L)/390 (6.4L)/406 (6.6L)/410 (6.7L)/427 (7.0L)/428 (7.0L)

• Take the Guesswork Out of Camshaft Selection!

The Edelbrock Performer RPM Camshaft Kit (Part #7106) is engineered specifically for Ford FE 390-428 V-8 engines, delivering exceptional performance for street and high-performance applications. Designed to optimize power from 1500 to 6500 rpm, this hydraulic flat tappet camshaft works in conjunction with Edelbrock's #7105 intake manifold and #60069 cylinder heads to produce up to 418 horsepower and 434 ft-lbs of torque on a 390 engine. Its high-lift and longer duration profile provide increased airflow and combustion efficiency, resulting in noticeable gains in both horsepower and torque across a wide rpm range. The camshaft features a duration of 236 degrees at .050 lift on both intake and exhaust, with valve lift of .572 inches, a lobe separation angle of 108 degrees, and an intake centerline of 103 degrees, ensuring optimal valve timing and engine responsiveness. The kit includes hydraulic lifters, making installation straightforward and reliable for seasoned mechanics and enthusiasts alike. This camshaft is dyno-matched for compatibility with Edelbrock Performer RPM manifolds to maximize high-rpm horsepower while maintaining acceptable low-end torque, with an idle vacuum of approximately 11 inches at 1000 rpm. Whether restoring a classic Ford Thunderbird or upgrading a Mercury Cougar, this part offers a proven solution to enhance engine performance and driving enjoyment. Note that this product is not carburetor approved and requires acknowledgment of specific installation considerations. The Edelbrock Performer RPM Camshaft Kit is a trusted choice for enthusiasts seeking to take their Ford FE engine to the next level of performance.

Features:

• Optimized for Ford FE 390-428 V-8 engines to maximize horsepower and torque

• High-lift and longer duration cam profile for improved airflow and power

• Includes hydraulic flat tappet lifters for easy installation and reliable operation

• Dyno-matched with Edelbrock Performer RPM manifolds for high-rpm horsepower

• Designed for street performance applications with a broad power band from 1500 to 6500 rpm

• Precise valve timing with 236 degrees duration at .050 lift and .572 inches lift

• Suitable for restoring or upgrading classic Ford Thunderbird and Mercury Cougar models