Are you looking for the next update for your stock, turbocharged Audi B8 A4? The AWE Tuning Front Mount Intercooler B8 A4 reduces intake temperatures by 30%. In addition to cooler intake temperatures, you will also see increases of 21 HP and 20 lb/ft of torque to your Audi B8 A4. Your stock front mount intercooler allows for harsh temperatures that hurts the performance of your vehicle because it doesn't cool the intake charge effectively at a performance level. This front mount intercooler from AWE Tuning for your Audi B8 A4 was developed in order to bring your intake temperatures down and performance levels up.
Note: Currently not available for vehicles equipped with Audi Drive Select.
AWE Tuning A4 Intercooler Benefits
Intake temperatures reduced by 30%
Dyno proven +21 Crank HP and +20 lb/ft crank torque gains
Uses OEM clamps and hoses
OEM fitment behind crash bar
OEM radiator and A/C system compatible
Constructed from 100% aluminum for maximum heat dissipation
Tubing is 2.5 inch mandrel bent aluminum
End tanks made from cast aluminum with inlet baffle
Parts pressure checked before it is shipped from the factory
2009+ Audi A4 with Quattro
Currently not available for vehicles equipped with Audi Drive Select
Why It Works
AWE Tuning used a sophisticated Computer Aided Design software to develop an intercooler with end tanks and a core that is significantly larger than the stock Audi B8 A4 front mount intercooler. This end tank and core combination allows for maximum heat dissipation, which decreases the intake air temperatures by 30% over the stock A4 intercooler.
The reduction in intake air temperature results in increases of 21 HP and 20 lb/ft torque to the crank. Also, the ability to use factory hoses and clamps helps keep the cost down for you. AWE Tuning has tested and developed their front mount intercooler through constant testing, and went through 14 different revisions to ensure that you are receiving the best possible product for your Audi B8 A4.
AWE Tuning End Tank Design vs. Stock
The AWE Tuning Front Mount Intercooler utilizes a different designed end tank compared to the stock and other typical box-styled end tanks. The box styled end tanks on the stock intercooler creates a significant amount of air turbulence which results in poor cooling and air flow to the core.
The end tank design of the AWE Tuning Front Mount Intercooler reduces the air turbulence going to the core and keeps the pressure drop to a minimum. The AWE Tuning designed end tank also allows for a larger intercooler core which helps provide a 45 degree F drop in temperature in comparison to the stock intercooler.
Have Any Questions? Please Give One of Our Sales Representatives Today at (714) 582-3330
All the data AWE Tuning has collected was on their Mustang MD-AWD-500-SE AWD dynamometer utilizing the dyno's built-in data acquisition as well as a portable, lab grade datalogger. Back to back runs were made while testing the stock and AWE Tuning intercoolers to show consistent power increase and temperature decreases. When combined with a chip upgrade, the stock turbo runs at near-capacity and produces significantly more heat than at stock levels. The AWE Tuning Front Mount Intercooler for the Audi B6 A4 produces more power and less heat as shown in the dyno test reports.
The AWE Tuning B8 A4 Intercooler is a medium - advanced installation. Basic hand tools and some modification to OEM parts are required.
Click Here For AWE Tuning Front Mount Intercooler B8 A4 Installation Guide
AWE Tuning Front Mount Intercooler B8 A4 Gallery