Benefits:
- Pull ahead of the competition with an aFe Open Element Intake for your C8 Corvette.
- Give your engine that intoxicating induction noise!
- Improve the look of your engine bay.
- Better gas mileage makes it easier to sell your significant other on.
- Cleanable air filter for low cost maintenance.
Features:
- Dyno-tuned lightweight 100% carbon fiber tube
- Premium silicone couplings and hardware
- Heat resistant housing that enclosed the dual air filter set up
- Dual 360-degree radial flow performance air filters
- Housing seals to the trunk cover to protect air filters from unwanted engine heat
Applications:
- 2020-2021 Chevrolet Corvette (C8) V8 6.2L Gas
Description:
Large Five Layer Performance Air Filters:
Dual 4” Flange 360-degree radial flow air filters feature our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. They provide your engine with the largest amount of high-flowing air, and in most cases deliver the highest power gains of our filter media options. This media is perfect for street and/or track use. Their inverted tops make for more filter surface area, resulting in longer service intervals.
Premium Hardware:
Premium stainless steel clamps and flexible silicone couplings are used for strength and durability while also providing the most secure installation available.
Emission Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
Carbon Fiber Intake Tube:
Lightweight twill weave carbon fiber tube directs the filtered air from the dual air filters to the engine. It is computer designed and dyno tested to increase air flow while reducing weight and enhancing the visual appearance of the engine bay. The tube is manufactured out of 100% carbon fiber material (No fiberglass).
Heat-Resistant Housing:
The dual air filters are surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. It is precisely designed and manufactured to fit perfectly into the factory mounting location. The housing connects to the factory air inlets on each side of the vehicle to capture the coolest air available. Silicone bellow couplings are used for engine movement and easy installation.
Seals to the Trunk Cover:
The seal trim installed on the housing edge seals to the plastic trunk cover to protect the air filters from unwanted warm engine air. This set up allows for more aggressive air intake noise while not sacrificing any performance.
