COMP Cams Guide Plates Olds 5/16 Hardened and black oxide coated for durability, this flat one-piece guide plate set is designed for Oldsmobile 350-455 engines with 5/16" studs and 5/16" pushrods. See 4842-1 for single guide plate. MSRP: Was: Now: $26.95
COMP Cams Guide Plates Pontiac 3/8 Guide plates are a must for the high lift/spring pressure environments of today's performance engines. Each one is designed using stereo lithography design techniques for the ultimate accurate fit... MSRP: Was: Now: $27.95
COMP Cams Guide Plate Gm LS1 5/16 Flat Hardened and black oxide coated for durability, this flat one-piece guide plate is designed for GM LS engines with 8mm studs and 5/16" pushrods. See 4854-8 for set of 8 guide plates. MSRP: Was: Now: $9.95
COMP Cams Guide Plates Gm LS1 5/16 Flat Hardened and black oxide coated for durability, this flat one-piece guide plate set is designed for GM LS engines with 8mm studs and 5/16" pushrods. See 4854-1 for single guide plate. MSRP: Was: Now: $35.95
COMP Cams Guide Plate Gm LS1 3/8 Flat Hardened and black oxide coated for durability, this flat one-piece guide plate is designed for GM LS engines with 8mm studs and 3/8" pushrods. See 4856-8 for set of 8 guide plates. MSRP: Was: Now: $9.95
COMP Cams Guide Plates Gm LS1 3/8 Flat Hardened and black oxide coated for durability, this flat one-piece guide plate set is designed for GM LS engines with 8mm studs and 3/8" pushrods. See 4856-1 for single guide plate. MSRP: Was: Now: $32.95
COMP Cams Camshaft C409 47S283THR8 High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle. MSRP: Was: Now: $739.95
COMP Cams ID Spring Seat 1.655 X 570 X Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4860 features a 1.655" OD and a .570" ID. MSRP: Was: Now: $11.95
COMP Cams Camshaft 348/409 279T H-107 T Performance street with good low end, stock converter ok, needs gears. Choppy/thumping idle. MSRP: Was: Now: $341.95
COMP Cams ID Spring Seats Eb 1.655 X 57 The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this... MSRP: Was: Now: $292.95
COMP Cams Camshaft C409 47S291THR8 High performance street/strip, needs 9:1 compression, 2500+ stall. Intake, gears, and headers. Rough idle. MSRP: Was: Now: $739.95
COMP Cams Camshaft 348/409 287T H-107 T High performance street/strip, aluminum heads recommended, 2000+ stall, gears and headers, rough idle. MSRP: Was: Now: $341.95
COMP Cams ID Spring Seats 1.655 X 570 X Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4860 features a 1.655" OD and a .570" ID. MSRP: Was: Now: $68.95
COMP Cams Camshaft C409 47S299THR8 Street/strip, needs 9.5:1 compression, 2800+ stall. Intake, gears, and headers. Very rough idle. MSRP: Was: Now: $739.95
COMP Cams Camshaft 348/409 295T H-107 T Street/strip, aluminum heads necessary, 2500+ stall, gears and headers, very rough idle. MSRP: Was: Now: $341.95
COMP Cams Spring Seats Eb LS1 Beehive The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this... MSRP: Was: Now: $292.95
COMP Cams Spring Seat LS1 Beehive W/ .5 Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4861 features a 1.300" OD and a .510" ID. MSRP: Was: Now: $11.95
COMP Cams ID Spring Seat Gm LS71.270in X Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4862 features a 1.270" OD and a .520" ID. MSRP: Was: Now: $11.95
COMP Cams ID Spring Seats Eb Gm LS7 1.2 The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this... MSRP: Was: Now: $278.95
COMP Cams ID Spring Seats Gm LS7 1.270in Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4862 features a 1.270" OD and a .520" ID. MSRP: Was: Now: $68.95
COMP Cams ID Spring Seat 1.300 X 570 X Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4863 features a 1.300" OD and a .570" ID. MSRP: Was: Now: $11.95
COMP Cams ID Spring Seats 1.300 X 570 X Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4863 features a 1.300" OD and a .570" ID. MSRP: Was: Now: $68.95
COMP Cams ID Spring Seats 1.350 X 515 X 4868-16 Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4868 features a 1.350" OD and a .515" ID. MSRP: Was: Now: $68.95
COMP Cams ID Spring Seat 1.350 X 515 X 4868-1 Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4868 features a 1.350" OD and a .515" ID. MSRP: Was: Now: $11.95
