Features - Lightweight design and construction
- Fully custom wheel without the large price
- Custom offsets, fitment, and finish
- TPMS compatible
- Can be made to fit any Chevrolet car
- Clears OEM brake calipers and BBKs
Available Sizes & Offsets | 18"" | 19"" | 20"" | | 18x8.5 ET10 - ET50 | 19x8.5 ET10 - ET50 | 20x8.5 ET10 - ET50 | | 18x9.0 ET15 - ET55 | 19x9.0 ET16 - ET44 | 20x9.0 ET16 - ET56 | | 18x9.5 ET22 - ET62 | 19x9.5 ET10 - ET50 | 20x9.5 ET2 - ET42 | | 18x10 ET10 - ET50 | 19x10 ET16 - ET56 | 20x10 ET29 - ET69 | | 18x11 ET23 - ET63 | 19x11 ET26 - ET69 | 20x10.5 ET15 - ET55 | | 18x12 ET36 - ET75 | 19x12 ET42 - ET82 | 20x11 ET42 - ET82 | | | | 20x12 ET34 - ET74 |  KaTech CF Front Lip / CFKits Side Skirts Forgestar CF5 Matte Black 18×10 / 19×12
Pirelli P-Zero 285/35-18 / Michelin Pilot Super Sport Tires 345/30-19 on KW V3 Coilovers Forgestar CF5 Wheels Available Finishes
All Forgestar CF5 finishes are powdercoated for great durability and ease of maintenance. If you would like a custom pinstripe please call in to place your order, (714) 582-3330. The following are the available powdercoat finishes. - Gloss Black
- Matte Black
- Textured Black
- Silver
- Gunmetal
- Textured Gunmetal
- Frost White
- Race Gold
- Brushed Titanium
- Premium custom powdercoat finishes also available (See below)(Sapphire Blue, Sunset Orange, Takata Green, etc)
- Carbon Overlay - 100% real carbon fiber overlay
- Karbon Overlay- This is a carbon fiber look overlay
|  Looking for a lightweight and yet still great looking set of wheels for your Chevrolet? Look no further than the flow formed Forgestar CF5 Chevrolet Wheel. The Forgestar CF5 is a completely custom wheel, without the heavy price usually associated with this. Being a flow formed wheel allows the Forgestar CF5 to be extremely durable, and even weighs up to 15% less than a cast wheel. Flow form is a special casting process that turns the wheel over a special mandrel and three hydraulic rollers using tremendous pressure. The pressure and turning then forces the rim area to form against the mandrel, creating the shape and width of the rim. During flow forming, the rim actually ""flows"" down to create the full rim width. Pressure applied to the wheel actually changes its mechanical properties, so its strength and impact values become similar to those of a forged rim. Please note the Forgestar CF5 Wheels will require cone seat lug nuts so that the wheels sit properly on the hub. We can provide these for you (see attributes). The price above is for a set of 4 Forgestar CF5 Wheels!
| Why Forgestar wheels are better than cast wheels - Custom Offsets - Forgestar wheels can be made in virtually any offset, whereas standard cast wheels come in a set offset. This allows you to dial in exactly how you want your wheels to sit (we can help you select the offset you need for the look your looking for). Having custom offsets allows for fitment of wider wheels on both stock suspension and lowered vehicles. Forgestar wheels are designed specifically for your car and it's suspension setup, where cast wheels are designed for everyone and typically do not take in to account lowered suspension setups or fender modifications.
- Weight - Forgestar wheels are much lighter than cast wheels. The 18x8.5 Forgestar CF5 wheel weighs an amazingly light 19.95 lbs, where a cast wheel of this same size would weigh anywhere from 24-26 lbs. This is a saving of roughly 5-7 pounds per wheel makes a BIG difference in regards to handling and drivability. Reducing unsprung weight (weight that is not supported by the car's suspension, i.e wheels, tires, brake rotors, and brake calipers) is one of the easiest ways to improve your car's handling, braking, and acceleration. As a general estimate 1 pound of unsprung weight is equal to 10 pounds of static weight. (weight that is supported by the vehicle's suspension). By using this ratio if you were to replace your stock wheels that weighed 27 lbs with Forgestar wheels you would be saving 180 lbs. in static weight!
- Strength - Flow-formed wheels are similar in strength to that of a fully forged wheel, without the cost. The process used to make the Forgestar wheels is the same process BBS wheels uses as well. The Forgestar CF5 is rated at 1520 lbs per wheel which is considerably more than a cast wheels which are typically around 1000-1200 lbs. per wheel.
- Range of Sizes - Forgestar wheels are available in a multitude of sizes, allowing you to decide exactly what diameter and width you want to run on your vehicle, rather being forced to run a set staggered size with cast wheels (As cast wheels usually are only available with one set front wheel width, and one rear wheel width).
  Wheel Weights - 18x8.5 - 19.95 Lbs
- 18x9.0 - 20.9 Lbs
 |
Shipping
Local pickup of these wheels can be performed in the southern California area, please e-mail a ModBargains sales representative to schedule an appointment. Otherwise shipping is a flat $99 to the US. International shipping quotes are available via email.  Not sure what Forgestar CF5 finish will look best with your Chevrolet? Call us at 714-582-3330 |
|
Forgestar CF5 Wheels Finishes:
Matte Black:
Forgestar CF5 Matte Black 18×10 / 19×12
Pirelli P-Zero 285/35-18 / Michelin Pilot Super Sport Tires 345/30-19 on KW V3 Coilovers
Forgestar CF5 Matte Black 18×10 / 19×12
Pirelli P-Zero 285/35-18 / Michelin Pilot Super Sport Tires 345/30-19 on KW V3 Coilovers
Gunmetal Finish:
Forgestar CF5 Sapphire Blue Finish (Custom):
Forgestar CF5 Sunset Orange Finish (Custom):
Forgestar CF5 Carbon Overlay (Custom):
Forgestar CF5 Takata Green Finish (Custom):
Semi Gloss Black:
Brushed Black:
Blood Red: 
Anodized Purple:
Tiffany Blue:
Bronze Burst:
Brushed Charcoal:
Not sure what Forgestar CF5 finish will look best with your Chevrolet? Call us at 714-582-3330
