Dinan Carbon Fiber Cold Air Intake for 2011 BMW 1M [E82] - D760-0034

(No reviews yet) Write a Review
Free Shipping
Dinan Carbon Fiber Cold Air Intake for 2011 BMW 1M [E82]

  • Get rid of your boring stock engine sound and accentuate your exhaust tone and adds a sportier, more aggressive sound to your car.

  • Feel the power push you back in your seat with an additional 14hp @6000rpm and 16tq @3400rpm utilizing Dinan Stage 3 components.

  • Stay ahead of the competition with the added performance gains that you'll receive from this cold air intake system.

  • 3 Dinan point
  • Stock car produces 5 Hp and 6 ft-lb torque
  • Stage 1 produces 9 Hp and 10 ft-lb torque
  • Stage 2 produces 12 Hp and 13 ft-lb torque
  • Stage 3 produces 14 Hp and 16 ft-lbs torque

  • 2011 BMW 1M [E82]
Dinan Carbon Fiber Cold Air Intake for BMW 1M E82

Dinan's cold air intake force feeds the 3 liter turbocharged inline 6 with greater volumes of cool, oxygen rich air for substantial power gains by utilizing their secondary carbon fiber intake. The system is so effective that the carbon fiber inlet air temperature is a full 40 degrees Fahrenheit cooler than the incoming air from the stock inlet. Due to the increased airflow from Dinan's intake, the power-curve is extended into the higher RPM’s for a noticeable change.

The system is a direct replacement for the factory air box lid, employing a hand-crafted carbon fiber unit that also includes a secondary carbon fiber intake tube that captures cool air from the lower grill and includes the shielding for the conical filter to insulate it from power robbing engine compartment heat. With a peak horsepower of 398 at 5700 rpm and the peak torque of 429 lb-ft at 4300 rpm as tested with Dinan High Capacity Oil Cooler System, intercooler and Dinan Free Flow Exhaust is a monumental increase from stock.

Stock car gains 5 Hp and 6 ft-lb torque & Dinan Performance Software is highly recommended.

Please Note: This kit requires the deletion of the auxiliary radiator in the front left of the car. A Dinan High Capacity Oil Cooler is required to maintain adequate engine cooling and warranty coverage.
Dinan Carbon Fiber Cold Air Intake for BMW 1M

If you feel that you cannot properly perform this installation, we HIGHLY recommend you bring in your vehicle and let one of our technicians do the install.

Book Now

Mod Experts Are Standing By! Please Give Us a Call and Talk to a Specialist (714) 582-3330

Mod Category:
Mod Subcategory: