Benefits:
- Get the most power out of your C8 Corvette possible.
- Give your C8 Corvette's exhaust an even deeper note that's sure to turn heads.
Features:
- TIG Welded Inlet Ports
- Tri-Y Design with Optimized Tube Lengths
- Titanium Cerakote Ceramic Outer Finish Reduces Heat in Engine Compartment
- Up to +17 HP and +24 lbs. x Ft. TQ.
- Copper Ceramic Inner Coating improves Exhaust Flow
- Constructed from 1-7/8" - 2-1/8"- 2-3/4” Mandrel-Bent 304 Stainless Steel Tubing
Applications:
- 2020-2021 Chevrolet Corvette (C8) V8 6.2L Gas
Application Notes:
- Fitment Note: This item is preferred for convertible models to reduce heat exposure to convertible top when down.
- Emissions Disclaimer: These Headers are 50-state legal (CARB E.O Number D-550-49).
- Installation Instructions
- Dyno Chart
Description:
aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.
Powerful Sound:
These headers produces a powerful sound unleashing all available horsepower and torque.
Performance Gains:
This system produced gains of up to +17 HP and +24 lbs. x Ft. TQ., as measured on our in-house dyno.
Titanium Cerakote Ceramic Outside Coating with Copper Ceramic Inside Coating:
This coating combination reduces the outside surface temperature of headers and reduces engine compartment temperatures by as much as 46% vs. non-coated headers. These headers are highly recommended for
convertible applications where the top is stored over the engine compartment.
Retains Factory Sensors:
This system has been designed to retain all factory sensors and is compatible with the factory catalytic converters for a hassle-free installation.
Includes Auxiliary O2 bung:
These Headers includes an auxiliary O2 bung and plug for either a wide-band O2 sensor or other instrumentation.
Hardware included:
Includes manifold bolts and factory gaskets for a direct bolt-on system. No cutting or modifications required.
Tri-Y Design with Optimized Tube Lengths:
Tri-Y designed with optimized tube lengths and specifically tuned paired opposite firing cylinders to improve cylinder scavenging, exhaust flow, and performance.
1-7/8" - 2-1/8" - 2-3/4” 304 Stainless Steel Construction:
This system is constructed of 1-7/8" - 2-1/8"- 2-3/4” mandrel-bent 304 stainless steel tubing for maximum strength, durability, and corrosion resistance.
TIG Welded Inlet Ports:
TIG Welded inlet ports for strength, eliminating flange warpage, and improves exhaust flow.
Computer-Aided Design:
Utilizing state-of-the-art computer-aided design technology, these headers are designed for custom, high tolerance factory fitment.
304 Stainless Steel Flanges:
Factory style laser cut 304 stainless steel flanges are used for a secure leak-free seal.
