Skip to main content

No Longer Available - Helix Stepped Core Intercooler 135i/335i N54/N55

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

$1.00
(No reviews yet) Write a Review
SKU:
Helix-Intercooler-135i-335i-ER3

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

WARNING: product may contain chemicals known to the State of California to cause cancer, birth defects, and/or reproductive harm.
For more information, go to www.P65Warnings.ca.gov.

DISCLAIMER: Products that affect or remove vehicle emissions equipment (Intakes, Manifolds, Tuners, etc) that do not have a CARB EO number may not be available for sale in the state of California. Please contact us if you are unsure if a product is available for sale in California. ModBargains complies with all EPA and CARB regulations.

ModBargains is proud to introduce a new line to our 135i/335i intercoolers.  Helix is world renowned for their unique step design intercooler.  Helix spent countless hours to design their Stepped Core Intercooler (SCI).  It features a larger frontal ambient face combined with thicker-than-stock core that seals to the radiator fan/shroud. The cast aluminum end tanks have factory mounting points and factory charge pipe angles.

Since Helix has come out with their Helix Stepped Core Intercooler for BMW N54/N5 Engine, there has been many imitators but non come close to the quality of Helix.  The Helix SCI features cast end tanks for reduced turbulence and bull-nosed bars on the ambient face as well as the hot side of the intercooler. This increases air flow across the face of the intercooler as well as reducing pressure drop through the core. The core of the Helix SCI has increased fin density and will flow 400 horsepower with only a 0.5PSI pressure drop, while greatly reducing heat soak.

Installation is straightforward and does not require removal of the front bumper. In rare circumstances, very minor trimming of the plastic shroud may be necessary depending on which model you have, but this is rare. Two sets of hands are usually all that is needed for a trim-free installation.

NOTE:  There have been changes to the intake charge pipe on models built after 04/09. You may need a different charge pipe to install the Helix SCI. Please call us at 714-582-3330 you need the adapter pipe for your Helix SCI.

If you have any questions about the Helix Stepped Core Intercooler please give us a call at 714-582-3330

Buy Helix Stepped Core Intercooler for BMW N54/N5 Engine @ ModBargains.com Buy Helix Stepped Core Intercooler for BMW N54/N5 Engine @ ModBargains.com

Benefits:

  • Reduces heat soak
  • Trimming rarely required
  • Larger and thicker cooler surface over stock

Features:

  • Larger frontal ambient face combined with thicker-than-stock core
  • Cast aluminum end tanks have factory mounting points and factory charge pipe angles.
  • Bull-nosed bars on the ambient face as well as the hot side of the intercooler
  • Increases air flow across the face of the intercooler as well as reducing pressure drop through the core
  • Increased fin density and will flow 400 horsepower with only a 0.5PSI pressure drop
  • Installation is straightforward and does not require removal of the front bumper

If you have any questions about the Helix Stepped Core Intercooler please give us a call at 714-582-3330

 

Buy Helix Stepped Core Intercooler for BMW N54/N5 Engine @ ModBargains.com

Buy Helix Stepped Core Intercooler for BMW N54/N5 Engine @ ModBargains.com

If you have any questions about the Helix Stepped Core Intercooler please give us a call at 714-582-3330

Mod Category:
Performance
Mod Category:
Intake
Mod Category:
Cooling