The Diode Dynamics Tail-as-Turn for the FRS and BRZ
This kit will make your LED tail light also function as the turn signal on your Scion FR-S or Subaru BRZ. By eliminating the factory incandescent turn signal bulb, and instead operating it through your LED tail light, you will gain a much more modern appearance.
Using OEM plug-and-play tail light connectors, the base kit is 100% plug-and-play, with no wiring required. You don't even have to remove your tail lights!
*Note: Since you convert the rear tail light to a turn signal indicator and brake light, there will be an open spot in the tail light to add reverse lights. The wiring for this is included in the kit, but the bulbs will need to be replaced with LED bulbs. If you would like to add extra reverse light leds, please select one of the ""Extra Reverse Bulbs"" drop down options. Adding extra reverse lights is highly recommended, as you gain much more visibility with the addition of extra bulbs.
This product was designed and fully manufactured by Diode Dynamics, in St. Louis, Missouri. It is fully made in USA.
Please note: since you will be eliminating your turn signal with this mod, your vehicle will think the turn signal bulb is out. To restore normal flashing speed, you will need to change your turn signal flasher module, which is the part that controls flashing speed. The installation is simple- please see our video here. If you already have an LED flasher module, you will not need another one.
This product is designed to be used with Diode Dynamics products. Use of non Diode Dynamics products may result in improper function.
If you wish, you can also convert the old turn signal socket to an extra high-mounted backup light! Each kit comes with the wires to accomplish this (see video for details) but you will need new white LED bulbs. You must use LEDs, not standard bulbs, because you will be drawing power from the backup light circuit.
Please call our experts for more info about the Diode Dynamics LED flasher relay for FR-S or BRZ Today at (714) 582-3330