| Stoptech Stage 2 Brake Upgrade The StopTech Stage 2 Brake Kit includes Centric Posi Quiet Brake Pads, StopTech Stainless Steel Brake Lines, StopTech slotted front and rear rotors, and three bottles of StopTech STR600 synthetic brake fluid. A stage 2 brake upgrade kit will fit your stock calipers, and is an excellent choice for the enthusiast whose rotors are nearing the end of their service life. The stage 2 kit includes all the components and benefits provided by the stage 1 kit, but adds value through the addition of direct replacement slotted rotors at all four corners. High performance front and rear street pads provide you with higher resistance to fade, higher maximum operating temperature, and better initial bite to allow consistent deep braking into corners. Three bottles of StopTech STR600 brake fluid increases both wet and dry boiling points and prevents boiling even under the most severe operating conditions. Good for street and autocross. Not for extended track sessions. |  |
 | About Axis Ultimate Brake Pads Axis Ultimate Brake Pads use Kevlar® and ceramic-strengthened formula with a high co-efficient of friction and excellent high temperature wear and fade. Axis Ultimate Brake Pads are designed for performance driving yet provide more than sufficient stopping power under less stressful conditions. Maintain a firm pedal feel time after time with Axis Ultimate Brake Pads.
|
| StopTech Slotted Rotors StopTech SportStop Slotted Rotors will fit your vehicles stock calipers and provide increased stopping power over OE. Slotted rotors add more ""bite"" to your brakes, and prevent your brake pad from glazing. Quality is ensure because SportStop Slotted Rotors are manufactured to meet or exceed factory rotor specifications. |  |
| About StopTech Stainless Steel Brake Lines StopTech Stainless Steel Brake Lines improve pedal feel and reduce the amount of time between applied pedal pressure and actual deceleration by preventing expansion. This provides a quicker pedal response, and allows the driver to maintain consistent brake pressure and precision brake modulation. StopTech Stainless Steel Brake Lines are 100% DOT compliant and can withstand pressures of 4500 PSI. StopTech brake lines consist of a Teflon inner line that is covered with a layer of stainless steel woven braid. The Teflon tube is resistant to expansion while under pressure and will not degrade from being exposed to brake fluid. |  |
 | StopTech STR600 Brake Fluid This synthetic fluid has a higher boiling point than stock fluid for operation in racing conditions. StopTech STR600 Brake Fluid provides improved pedal feel over typical brake fluids. The boiling points are 312°C/593°F dry and 206°C/404°F wet.
|
Application Guide
| Vehicle | Part No. |
| 2004-2008 Mini Cooper/Mini Cooper S w/o JCW pkg/ No rear pad sensor | 977.34008 |
