These H&R Sport Springs for your new E70 BMW X5 provide your X5 with a lower stance to improve handling and appearance without compromising ride quality. Most importantly the E70 H&R Sport Springs are designed to work with your stock shocks - a direct replacement for your current suspension springs.
By replacing your stock suspension with the E70 H&R Sport Springs you can expect a lower stance in the front and rear. Successfully lower your X5 with a proven H&R suspension, the E70 H&R Sport Springs.
E70 H&R Sport Springs Features
Aftermarket lowering springs like the H&R Sport Springs are commonly used to lower the ride height and to reduce body roll. This is also often done when upgrading to a larger wheel and tire package to minimize unsightly wheel gap. When trying to decide which lowering springs are right for you, your goal should not be to drop down the car as far as possible. In many cases, overly lowering your E70 may actually be illegal for road use and cause it to perform worse than it did stock. Ideally using springs to lower your E70 are best done between 1"" and 2"", any lower and you would be better suited going with a coilover setup.
|Vehicle Model||Years||Self-Levelling Suspension?||Approx. Front Drop||Approx. Rear Drop||Part No.|
|X5||E70 2007-13||w/o Self-Levelling||2.0''||1.2''||50435|
|X5||E70 2007-13||w/o Self-Levelling||1.2''||1.2''||50435-3|
|X5||E70 2007-13||w/ Self-Levelling||2.0''||1.0''||50435-2|
|X5||E70 2007-13||w/ Self-Levelling||1.2'||1.0''||50435-4|
Installation for the E70 X5 H&R Sport Springs is classified as moderate hard. You will need standard tools to disassemble your suspension, in addition to a spring compressor. Professional installation is highly recommended for this product.