Skip to main content

Bilstein PSS10 Coilovers for 1999-2006 BMW 323i/325i/328i/330i + M3 [E46] 47-126848 48-126380

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

$1,075.00 - $2,033.00
(No reviews yet) Write a Review
SKU:
Bilstein_pss_pss9_e46_CS

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

Shipping:
$65.00 (Fixed Shipping Cost)

WARNING: product may contain chemicals known to the State of California to cause cancer, birth defects, and/or reproductive harm.
For more information, go to www.P65Warnings.ca.gov.

DISCLAIMER: Products that affect or remove vehicle emissions equipment (Intakes, Manifolds, Tuners, etc) that do not have a CARB EO number may not be available for sale in the state of California. Please contact us if you are unsure if a product is available for sale in California. ModBargains complies with all EPA and CARB regulations.

PSS Coilovers for BMW E46

Benefits

  • Eliminates Ugly Wheelgap So Your BMW Looks Its Best
  • Lower Center of Gravity offers Superior Handling
  • Performance Valved Integrated Shocks/Struts Respond Better than OEM For Razor-Sharp Handling
  • Control Your Ride Height Exactly with Adjustable Spring Perches
Chassis / Drivetrain Vehicle Model Coilover System Note Part Number
E46 323, 325, 328, 330 PSS (all models except Xi) 47-126848
E46 323, 325, 328, 330 PSS10 (all models except Xi) 48-126380
E46 M3 PSS10   48-126687


 

The Bilstein PSS Suspension allows you to adjust your vehicle's ride height without the expense of the fully adjustable damping system.

This system features both coilover and standard monotube gas pressure shocks with performance level valving along with application specific, progressive rate coil springs. The PSS system lets you set your car low and tight for optimum performance or back to a more stock like ride height and handling characteristics. Ride height adjustments can be made on the vehicle without removing the suspension. The solid aluminum spring seat and lock nut allows a selective adjustment of the vehicle's ride height. Spring travel and vehicle body height change, but the spring seat remains pre-loaded throughout the allowable range of adjustment.

PSS 10 System
The Bilstein PSS 9 Suspension provides the ultimate in performance tuning. The fully-adjustable monotube gas shock absorbers offer a selection of nine precise compression and rebound settings, from comfort to competition. The front and rear progressive rate springs allow accurate adjustment of the vehicle ride height and center of gravity for the level of performance you seek.

Now you can enjoy the kind of precise suspension tuning formerly available only on race cars. The PSS 10 system puts you in complete control. Whether it's a weekend of competition or the daily commute, absolute handling and control are just a few twists away.

About Coilover Suspension
A coilover suspension basically gives you a matched lowering spring and shock absorber combination with the added benefit of adjustable ride height and spring rates through a moveable spring perch or perches. Coilovers are to your car's advantage by reducing unsprung mass, increasing suspension travel, and allowing the car to be corner balanced.

Note

Part numbers have been changed to HE5-C684-H0, HE5-C684-H1 and HE5-C684-H2 has been changed to 47-126848.
Part numbers have been changed to GM5-C638-H0, GM5-C638-H1 and GM5-C638-H2 has been changed to 48-126380.
Part numbers have been changed to GM5-C668-H0, GM5-C668-H1 and GM5-C668-H2 has been changed to 48-126687.

 

If you have any questions about these Bilstein Coilovers for BMW please give us a call at 714-582-3330

Buy BMW Reflectors for BMW E92/E93 @ ModBargains.com

 

Mod Category:
Suspension
Mod Subcategory:
Coilovers