Skip to main content

Flat 6 Motorsports High Flow Intake System for 16+ Porsche Macan Base 2.0 / Diesel - F6-INT-95B-Base-CF

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

$479.00
(No reviews yet) Write a Review
SKU:
F6MIA00000
MFG P/N:
F6-INT-95B-Base-CF

We Price Match!

Speak with one of our Mod Experts

714.582.3330   or   Live Chat

We'll match or beat any competitor's price!


Some restrictions and exclusions apply.

Please see our full Price Match Policy for details.

Shipping:
Free Shipping

WARNING: product may contain chemicals known to the State of California to cause cancer, birth defects, and/or reproductive harm.
For more information, go to www.P65Warnings.ca.gov.

DISCLAIMER: Products that affect or remove vehicle emissions equipment (Intakes, Manifolds, Tuners, etc) that do not have a CARB EO number may not be available for sale in the state of California. Please contact us if you are unsure if a product is available for sale in California. ModBargains complies with all EPA and CARB regulations.

Benefits:
  • Pull ahead of the competition with a Flat 6 Motorsports intake for your Macan 2.0/Diesel.
  • Give your engine that sweet induction noise everyone loves!
  • Improve the visual appeal of your engine bay.
  • Better gas mileage makes it easier to justify to your significant other.
Features:
  • Pre-preg Dry Carbon Fiber with 2x2 weave construction Intake Ducts
  • High Flow Air Filter with Nano-Fiber Dry Media Filtration
  • Simple installation and OEM fit and finish
  • Improved Turbo and Throttle Response
  • Made in the USA
Applications:
  • 2015+ Porsche Macan S Diesel
  • 2015+ Porsche Macan 2.0T (Base)
Application Notes:
Description:

Porsche designed an excellent cold-air delivery solution utilizing ducts from the front grill that feeds air up through the hood and down into the airbox. However, they left room for improvement in their design to increase power. Porsche split the air channels into two runners to drive the air flow into two chambers in the airbox. This resulted in only two filter surface areas to bring air in. This keeps air pressure high on the outside of the filter but slows the velocity at which air can pass through the filter and into the charge pipe leading to the turbocharger.

After studying and analyzing this design, Flat 6 Motorsports developed a solution that was cost-effective and simple to install and service. The first principle was to increase the airflow in both volume and velocity. This was achieved by opening up the duct that connects to the hood allowing more air flow into the airbox. CFD analysis was then used to optimize the design of the air filter design and material. Advanced simulation software showed that a bell-horn like design would both maximize filter surface area and most efficiently distribute air flow around the filter which provides 360 degrees of material compared to just 180 degrees on the OEM filter. This design creates high-pressure on the outside of the filter while minimizing pressure drop inside the filter, causing an increase in stable high velocity air that leads to the turbocharger.


Flat 6 Motorsports Macan Intake Duct System vs Stock
Flat 6 Motorsports Porsche Macan Air Filter Design
Mod Category:
Intake
Mod Subcategory:
Intakes