Diode Dynamics Turn Signal LEDs for 2016 Ford Focus RS (Pair)
| Benefits |
- Brighten up your future with these luxurious LEDs. They will give your Focus RS that luxury look that comes in high end vehicles.
- Be seen at night when you're switching lanes by getting rid of that low output lighting and upgrade with some crisp and vibrant LED bulbs.
- These turn signal LEDs will make your Focus RS light up like a roman candle and you'll be out shinning the competition.
- Modern LED Output
- PnP Installation
- HP48: Slightly lower brightness than OEM
- HP11: Slightly higher brightness than OEM
- XP80: Much brighter than OEM.
- 3157 Terminal
| HyperBlinking: Turn signals on most vehicles will begin to blink fast (hyperblink) when LED bulbs are installed. This is caused by the new LEDs using less power, so your vehicle will think that the bulb is out. You can fix this problem by adding a resistor to the bulbs circuit. This will mimic the power consumption of the original bulbs and return the vehicle to normal blinking speed. |
These LEDs come in various colors and brightness options. The turn signal LEDs are available in Red and Amber. You can also choose from three bulb models:
The HP48 is a non-polar bulb, CK compatible, with 48 Epistar 3014 LED chips. The light from this High-Power bulb is shined backwards and away from the bulb providing excellent output by using the vehicles housing completely.
The HP11 has four side-firing 1.5W-rated Osram LED chips, and one 5W-rated CREE LED chip on top, which is projected by a lens for maximum brightness. The bulb is also housed in a machined aluminum casing, which provides superior heat diffusion for long life.
The XP80 has four sides on this bulb that contains two 5W-rated CREE chips, and the top is fitted with four more under a projector lens. This is the brightest self-contained automotive LED bulb on the market. It is housed in an aluminum casing with a textured finish for maximum heatsinking properties.
These bulbs use a 3157 terminal, with a full-size base connector and pin alignment for exact replacement of your factory 3157 bulb.
Please Note: These LEDs are rated with low lumens because unlike other brands, Diode Dynamics doesn't provide ""calculated"" numbers. For example, if a bulb has five 10-lumen chips, competitors' will rate it as 50 lumens. This ""calculated"" lumen rating is actually much higher than the true, measured light output, so it will look like the competitors' bulbs are brighter.
If you feel that you cannot properly perform this installation, we HIGHLY recommend you bring in your vehicle and let one of our Mod Experts do the install.
Mod Experts Are Standing By! Please Give Us a Call and Talk to a Specialist (714) 582-3330